Boiler KP 22 with possible operation of continuous output from 8,5 kW.
Fully automatic boiler KP 22 is also equipped with automatic cleaning of the heat exchanger and ash removal. Its operation can be controlled equithermally on the basis of outdoor temperature.
On request can be equipped with GSM communications or Internet access, also with the possibility to control several heating circuits or with additional equipment.
The boiler has excellent emission parameters!
This is an automatic boiler controlled by thermostats. Permanent service is not needed, occasional service consists of controling the fuel level in the bin and checking the amount of ash in the ashtray.
Boilers are intended for combustion of all types of wood pellets of a diameter of 6 mm and 8 mm.
Boilers consist of boiler body – a steel weldment with wall thickness of 3 – 6,3 mm; linear burner made from heat-resistant stainless steel, ceramic parts, boiler jacketing with thermal insulation, electronic control unit and fuel feeders. The boiler also includes components to ensure safe operation. Automatic control of operation is provided by control unit often together with room and SW thermostats.
The boiler output can be set in the range 30 – 100% of rated output and in this entire range the boiler achieves the same efficiency and emission limits. The boiler must have operating fuel tank, which can be placed freely around the boiler.
|Rated output||29 kW|
|Output range||8 - 29 kW|
|Fuel consumption||2 - 6,8 x hod -1|
|Efficiency||91 - 91,2 %|
|Temperature of combustion products||94 - 150 °C|
|Required draught||0,1 - 0,2 mbar|
|Recommended temp. of heating water||60 - 80 °C|
|Dimensions||745 x 1046 x 1440 mm|
|Electric input||210 W|
|Conecting voltage||230 V AC ± 10%, 50Hz ± 2Hz|